Ceramic Paint Protection

Superscript

HOW TO APPLY CERAMIC COATING

Here is the list of the right supplies before starting.

• Ceramic coating (highly recommend Swissvax as it has classic texture breaks down easily as you apply)

• Gloves

• Microfiber cloth

• Silica spray

• Several sponges

Once you have these items, you can begin the ceramic paint application process.

SAFETY FIRST

Before applying for ceramic protection, ensure the car is in a safer protected place such as a garage to protect it from dust, dirt, and sun. Once you get a shaded place, ensure the surface temperature of the vehicle is between 50 and 70 F. If you washed the car when there was so much heat, you might need to let it “cool down” first.
When applying ceramic paint protection the professional uses respirators to avoid product fumes and protective gloves. Then, dispense the product in small quantities on a micro-suede towel and gently apply it in small strokes on the vehicles’ surface.
The paint ceramic coating on the car is applied horizontally and vertically to ensure an even application and no spots are left out. Once the solution begins to harden and dry on the sponge, throw it away and use a new one. If you don’t change, you might end up with a slovenly application.

GIVE IT TIME

Allow the coating to sit for about five minutes on the car. Depending on the solution you use, the waiting time may be longer or shorter; hence ensure you read the recommended time given under the instruction part. Don’t let it sit for too long; the solution might harden and dry before finishing the next step.

WIPE DOWN

To give a glossy smooth finish, wipe down the coating using a microfiber cloth. This is after you have waited enough time. You don’t have to worry if the solution feels slightly wet. Actually, you risk running the coating if it’s so dry.

SILICA SPRAY APPLICATION

Wait for one hour before applying silica spray. Note that you don’t spray it directly on the car. Take microfiber cloth spray on it and wipe it down by hand.
The silica sprays add water-resistant and protective covering over the ceramic coating. It makes the solution appear glossy while still preventing water spots from forming.

KEEP THE CAR PARKED

After finishing the application, let the car remain parked for at least one day. It will help the coating get a chance to adhere to the setting and surface.

GIVE THE COATING MORE TIME

Depending on the outdoor humidity and temperature levels, the ceramic coating might take up to three weeks to fully cure. During this time, it doesn’t mean you can’t drive your car. You still can, but you should be careful. Ensure you keep checking the coating and remove any fragments immediately they land on the coating. Don’t wash the car during this particular period until you are sure the process is finished. Also, void leaving the vehicle in the sun or parked outdoor for a longer time.

Ceramic coat application is a tricky job, and you might end up with a messy-looking car if you don’t do it the right way. It’s so involving; thus, it’s advisable to leave it to the professionals.

At Mr. Sheen Premier, we give our customers quality services; whether it’s detailing your car or Ceramic paint protection, you will be sure your car is professionally maintained. Using Swissvax premium paint protection, our seasoned professional cleans, restore, protects and preserve any painted surface, glass, and metal, including upholstery, rims, paint, engine, and even wheels. We preserve your car to a “new like” status.